Hey, I got a Jamex Daytona seat the other day (thnx EVLTEK :)) and since I heard that you now need a certificate even if you only have a fixed rear bucket in a 2-door car. It`s true? I want to install it tomorrow, but I don`t want from the cops or anything like that. at the front, so that occupants of the rear seats can enter or exit. I emailed ltSA some time ago about this, here`s what they said about placing fixed bucket seats in my EG6: P.S Try to use hardened screws and nylocs when fixing the sharp iron brackets, the seats need to be mounted as securely as the factory. I just want to buy NZKW adjustable bucket seats for my e30 Coupe. As long as you have a seat through which a passenger can enter and exit (lying down) and the shovel is firmly attached, you should be well Note LVV certification is not required if the only change is the removal of seats and/or seat belts. However, in some cases, a change of class and a new nominal load may be required. This has to do with access to the back seat, my certificate required the seat not only to recline forward, but move forward to allow access to/from the rear seat. So if you can attach the bucket seat to the existing rail and maintain that spike movement and movement when using the tip lever, you don`t need a certificate (from what I understood from the person in the certificate). Seat cushions or covers (see (note 5) for seats with built-in airbags) I will still get these bucket seats because I just got a new arrest warrant and the next one I need a certificate anyway. In some cases, assembling bucket seats requires low volume The police searched my car countless times and although they found nothing (a*r spent a whole hour walking a whole night in the city), they did not punish me or even take a second look at the seats, apart from the fact that they are properly secured. Secondly, you can mount two non-folding bucket seats at the front of the child seats of the replacement brand “Retro” for children aged 5 to 12 years (up to 38 kg).
I have 2 fixed-back racing bucket seats in my CRX and I was able to get 4 (and more) mandates. They have not been certified. However, in e30, one side of the seat belt is attached directly to the rail/seat (moves with the seat, so if I keep camp rails and install these seats only on those standard rails, do I have to agree? or will it also require a certificate to configure the vehicle so that at least one of the front seats can be folded down well, I do not intend to take shortcuts. I`m going to do it in such a way that it`s structurally sound, I`m just worried that a hole inspector in the future will say I got non-OEM seats, so I need a certificate. I want to do it myself, but I just need to know the details of the certificate requirements (so I can avoid it). I am an experienced processor and I will have no problem making it stronger than OEM, and having the seat sitting lower than OEM (no pun intended), I just need to know the regulations regarding the modification of factory seats/rails. If you have repaired 2, then there is a rule that says a little more than 25 cm between the back part of the seat and the end of the door, I think, so that passengers can sneak in when an accident occurs. Either that or remove your back seats completely. 8) We need Jamex seats (not lying down) in the Teg and when we mounted them, Jamie made them to be on factory rails. That is, if we need an arrest warrant, we leave the drivers inside and put the original seat on the passenger side. If the inspector decides to inspect the other components of the seat belt, he must inform the driver. Any defects must be noted on the test sheet, but must not fail.
The test sheet shall contain the same information as above in order to clarify that the responsibility lies with the driver when reinstalling the seats. I have a firm and a backlash, so I`m also interested, but I`ve been issuing arrest warrants for years. 6. Where a safety belt or part of the safety belt is an integral part of a seat, the seat and seat anchorages shall be compatible in their strength with the safety belt or with the part of the seat belt attached to the seat. Your life might one day depend on that seat belt. Don`t take shortcuts! 4. The driver`s seat and its anchorages shall be designed, constructed and maintained in such a way that the driver can properly control the vehicle. The seat is adjustable, I don`t think it has the “slide forward” movement, I don`t think a spare seat does.
It is not possible to maintain this feature because it is unique to the factory seat mechanism (not only to factory rails), but I will study this. Seat anchorages are the parts of the vehicle structure to which a seat is attached. 3. The seats and anchorages shall be safe, strong, in perfect condition and compatible with each other and with the structure of the vehicle. i. The vehicle is not equipped with a valid LVV certification mark, or I have tried to check out the LTSA website, but there are so many things that it is impossible to find anything of reasonable use on this subject. You only need to get LVV certification if you`re heavily modifying your vehicle – and you`ll need the certificate before you can get your suitability guarantee. “repair” means the restoration of a damaged or worn vehicle, its structure, systems, components or equipment in a safe manner of its condition during manufacture, including its replacement with undamaged or new structures, systems, components or equipment. Once you start hacking your car, you will need a certificate 😉 I have Racepro Arrow 2 in my E30 and I didn`t need any certification. I kept all the standard stand/slider and made such pointed iron brackets to fit Racepro brackets.
Works in currency and has never had any problems with WOF or the police. 3. The frame or structure of a seat has been weakened, for example: due to damage, corrosion or excessive wear. You can publish now and sign up later. If you have an account, log in now to publish with your account. Vehicle, but in this case, you will need to permanently remove the rear of any changes for law enforcement purposes or the provision of emergency services 2. A seat is not attached to the structure of the vehicle by seat anchorages. 1.
The vehicle shall not be equipped with a driver`s seat. (b) wears out, resulting in excessive movement of the seat. If the inspector is presented with a Nissan Terrano or Nissan Mistral vehicle of the type equipped with a two-layer (two-layer) base plate, the inspection procedure described in Technical Bulletin 2 must be followed. 9. The driver`s seat is in such a state that it does not allow the driver to properly control the vehicle. A stressed seat is a seat on which a seat belt is mounted directly on one of the components that make up the seat and the seat frame. A discharged seat does not have a seat belt attachment point on the seat or seat frame (i.e. the seat belt is attached to another part of the vehicle structure). iii.
the vehicle has not been certified for a foreignly recognized system as described in Technical Bulletin 13. (a) is not exempt from the requirements for the accreditation of LVV specialists (Table 7-1-1);.